Protective effects of an alcoholic extract of Kaempferia galanga L. rhizome on ethanol-induced gastric ulcer in mice.

ETHNOPHARMACOLOGICAL RELEVANCE: The rhizome of Kaempferia galanga L., a medicinal and edible Plant, was widely distributed in many Asian and African counties. It has been traditionally used to treat gastroenteritis, hypertension, rheumatism and asthma. However, there is a lack of modern pharmacology studies regarding its anti-gastric ulcer activity. AIM OF THE STUDY: The objective of this study is to investigate the protective effects of an extract from K. galanga L. rhizome (Kge) and its active components kaempferol and luteolin on ethanol-induced gastric ulcer. MATERIALS AND METHODS: The kge was prepared by ultrasonic-assisted extraction, and the contents of kaempferol and luteolin were determined by HPLC. The mice were randomly divided into seven groups: blank control (0.5 % CMC-Na; 0.1 mL/10 g), untreatment (0.5 % CMC-Na; 0.1 mL/10 g), Kge (100, 200 and 400 mg/kg), kaempferol (100 mg/kg) and luteolin (100 mg/kg) groups. The mice were treated intragastrically once daily for 7 days. At 1 h post the last administration, the mice in all groups except the blank control group were intragastrically administrated with anhydrous alcohol (0.1 mL/10 g) once to induce gastric ulcer. Then, fasting was continued for 1 h, followed by sample collection for evaluation by enzyme-linked immunosorbent assay and real-time reverse transcription polymerase chain reaction assay. RESULTS: The contents of kaempferol and luteolin in Kge were determined as 3713 µg/g and 2510 µg/g, respectively. Alcohol induced severely damages with edema, inflammatory cell infiltration and bleeding, and the ulcer index was 17.63 %. After pre-treatment with Kge (100, 200 and 400 mg/kg), kaempferol and luteolin, the pathological lesions were obviously alleviated and ulcer indices were reduced to 13.42 %, 11.65 %, 6.54 %, 3.58 % and 3.85 %, respectively. In untreated group, the contents of Ca2+, myeloperoxidase, malondialdehyde, NO, cyclic adenosine monophosphate and histamine were significantly increased, while the contents of hexosamine, superoxide dismutase, glutathione peroxidase, and prostaglandin E2 were significantly decreased; the transcriptional levels of IL-1α, IL-1ß, IL-6, calcitonin gene related peptide, substance P, M3 muscarinic acetylcholine receptor, histamine H2 receptor, cholecystokinin 2 receptor and H+/K+ ATPase were significantly increased when compared with the blank control group. After pre-treatment, all of these changes were alleviated, even returned to normal levels. Kge exhibited anti-gastric ulcer activity and the high dose of Kge (400 mg/kg) exhibited comparable activity to that of kaempferol and luteolin. CONCLUSION: The study showed that K. galanga L., kaempferol, and luteolin have protective effects against ethanol-induced gastric ulcers. This is achieved by regulating the mucosal barrier, oxidative stress, and gastric regulatory mediators, as well as inhibiting the TRPV1 signaling pathway and gastric acid secretion, ultimately reducing the gastric ulcer index.

Nitrogen- and fluorine-doped bimetallic carbide as active and stable oxygen reduction reaction electrocatalyst.

Nitrogen- and fluorine-doped bimetallic carbide composites with graphite matrix (abbreviated as C19Cr7Mo24/NG and C19Cr7Mo24/FG) are synthesized through carbonization at 1300 °C. The C19Cr7Mo24/NG displays an initial half-wave potential (E1/2) of 0.873 V and suffers merely 3 mV decrease in E1/2 within 60,000 CV cycles for oxygen reduction reaction (ORR) in alkaline media. A H2/O2 fuel cell testing system using the C19Cr7Mo24/NG as cathode maintains 95.9% of the initial peak power density (1.08 W cm-2) within 60,000 cycles. The C19Cr7Mo24/FG shows higher ORR activity than the C19Cr7Mo24/NG. The positive and negative charge centers caused by the N or F dopants are the critical reasons to their high activities. While F and bimetallic carbide more favor electron transfer respectively than the N and monometallic carbide. Their excellent stabilities originate from interactions among atoms due to electron transfer and the intrinsic chemical inertness of graphite and bimetallic carbides.

Insights on the Roles of Nitrogen Configuration in Enhancing the Performance of Electrocatalytic Methanol Oxidation over Pt Nanoparticles.

Stabilization of the Pt in N-doped carbon materials is an effective method to improve the performance of electrocatalytic methanol oxidation reaction (MOR). Nevertheless, the roles of different N configurations (pyridinic N, pyrrolic N, and graphitic N) toward the electrochemical performance of Pt-based catalysts remain unclear. Herein, Density Functional Theory calculations are adopted to elucidate the synergistic promotion of MOR by different N-configurations with Pt nanoparticles (NPs). Guided by the theoretical study, a series of MOR electrocatalysts with different ratios of pyridinic N and pyrrolic N (denoted as Pt/N-CNT-X (500, 600, 700, 800, and 900)) are designed and synthesized. Surprisingly, the electrocatalytic activity of Pt/N-CNT-600 with a suitable ratio of pyrrolic-N and pyridinic-N for MOR reaches 2394.7 mA mg-1 Pt and 5515.8 mA mg-1 Pt in acidic and alkaline media, respectively, which are superior to the Pt/CNTs, commercial Pt/C, and the ever-reported Pt-based electrocatalysts. The strong metal-support interaction induced by the N-doping is the crucial reason for the superior electrocatalytic performance. More importantly, the ability of pyrrolic-N and pyridinic-N in promoting the adsorption and oxidation of CH3 OH and the oxidation of CO* is substantiated for the first time in methanol oxidation. This work provides new insights on the design of efficient electrocatalysts for MOR.

Carbon-Supported PdCu Alloy as Extraordinary Electrocatalysts for Methanol Electrooxidation in Alkaline Direct Methanol Fuel Cells.

Palladium (Pd) nanostructures are highly active non-platinum anodic electrocatalysts in alkaline direct methanol fuel cells (DMFCs), and their electrocatalytic performance relies highly on their morphology and composition. This study reports the preparation, characterizations, and electrocatalytic properties of palladium-copper alloys loaded on the carbon support. XC-72 was used as a support, and hydrazine hydrate served as a reducing agent. PdxCuy/XC-72 nanoalloy catalysts were prepared in a one-step chemical reduction process with different ratios of Pd and Cu. A range of analytical techniques was used to characterize the microstructure and electronic properties of the catalysts, including transmission electron microscopy (TEM), X-ray diffractometry (XRD), X-ray photoelectron spectroscopy (XPS), and inductively coupled plasma emission spectroscopy (ICP-OES). Benefiting from excellent electronic structure, Pd3Cu2/XC-72 achieves higher mass activity enhancement and improves durability for MOR. Considering the simple synthesis, excellent activity, and long-term stability, PdxCuy/XC-72 anodic electrocatalysts will be highly promising in alkaline DMFCs.

Cs3Cu2I5/ZnO Heterostructure for Flexible Visible-Blind Ultraviolet Photodetection.

Wearable, portable, and biocompatible optoelectronic devices made of all-green and abundant materials and fabricated by low-temperature solution method are the key point in the development of next generation of intelligent optoelectronics. However, this is usually limited by the weaknesses of mono-component materials, such as non-adjustable photoresponse region, high carrier recombination rate, high signal-to-noise ratio, as well as the weak mechanical flexibility of bulk films. In this work, the Cs3Cu2I5/ZnO heterostructure flexible photodetectors were constructed by a low-temperature solution method combined with spin-coating technique. The heterostructure combines the low dark current and strong deep ultraviolet absorption of Cs3Cu2I5 quantum dots with the high carrier mobility of ZnO quantum dots as well as the efficient charge separation of the vertical p-n junction, to improve the photodetection performance. The heterostructure shows enhanced light/dark current ratio and ultraviolet-to-visible rejection ratios. Under an illumination of 280 nm light, an optical detectivity as high as 1.26 × 1011 Jones was obtained; the optical responsivity and response time are much better than those of control devices. After 300 times of 180° bending cycles, the photocurrent had no obvious change. The results demonstrate that the Cs3Cu2I5/ZnO heterostructure has great potential in wearable and portable visible-blind ultraviolet optoelectronic devices.

Low-temperature N-anchored ordered Pt3Co intermetallic nanoparticles as electrocatalysts for methanol oxidation reaction.

To enhance nanocatalyst performance and durability for the methanol oxidation reaction (MOR) in a direct methanol fuel cell, small-sized (2.1 nm) and structurally ordered Pt3Co intermetallic nanoparticles are uniformly anchored onto nitrogen-doped carbon nanotubes (N-CNTs) via a low-temperature N-anchoring method, and the N-doping abilities of different N-containing reagents are compared. After investigating the microstructure of Pt3Co/N-CNTs and evaluating their catalytic activity for the MOR, the results show that N-doping facilitates the uniform loading of Pt3Co NPs and plays a crucial role in improving the electrocatalytic activity of Pt3Co NPs supported on CNTs. Pt3Co/N-CNT-M with melamine as the N dopant exhibits the highest MOR activity and stability among all N-CNT-supported Pt3Co NPs and Pt/N-CNT-M. Density functional theory calculations suggest that the doping of N enhances the binding energy of CNTs to Pt3Co NPs, and the MOR mechanism shows that the introduction of Co is the reason for the enhancement of MOR reaction kinetics. The excellent electrochemical performance of Pt3Co/N-CNT-M is mainly attributed to the synergistic effect of N and Pt3Co intermetallic nanoparticles. The combination of ordered alloy nanoparticles and high-performance carrier N-CNT-M described herein exhibits great potential for fuel cells and may provide an unequivocal direction for the optimization of catalyst performance.

Preparation of Chitosan/Clay Composites for Safe and Effective Hemorrhage Control.

Uncontrolled hemorrhage from trauma or surgery can lead to death. In this study, chitosan/kaolin (CSK) and chitosan/montmorillonite (CSMMT) composites were prepared from chitosan (CS), kaolin (K), and montmorillonite (MMT) as raw materials to control bleeding. The physiochemical properties and surface morphology of CSK and CSMMT composites were analyzed by Fourier transform infrared spectrometry (FT-IR), X-ray diffraction (XRD), scanning electron microscopy (SEM), zeta potentials, and X-ray fluorescence (XRF). The hemostatic mechanism was measured in vitro by activated partial thromboplastin time (APTT), prothrombin time (PT), in vitro clotting time, erythrocyte aggregation, and thromboelastogram (TEG). The hemostasis ability was further verified by using tail amputation and arteriovenous injury models in rats. The biocompatibility of CSK and CSMMT was evaluated by in vitro hemolysis, cytotoxicity assays, as well as acute toxicity test and skin irritation tests. The results show that CSK and CSMMT are promising composite materials with excellent biocompatibility and hemostatic properties that can effectively control bleeding.

Preparation and characterization of tranexamic acid modified porous starch and its application as a hemostatic agent.

Effective bleeding control is essential for the reduction of traumatic deaths among civilians and military personnel, particularly for physical visceral and arteriovenous injuries. Materials with good hemostatic properties have recently attracted significant scientific attention. In this study, a novel material of tranexamic acid modified porous starch (TAMPS) was produced through esterification. The structure of the final product was characterized using Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and thermogravimetric analysis. The hemostatic effect of TAMPS was preliminarily analyzed via in vitro clotting time, mouse tail amputation model and liver injury model experiments. Hemostatic effect of TAMPS was found to be significantly better than that of the positive control Quickclean. Through the exploration of related hemostatic mechanisms, TAMPS can promote coagulation via rapid fluid absorption and high erythrocyte aggregation capacity. The in vitro cytotoxicity, acute toxicity, and hemolysis tests revealed that TAMPS is safe and nontoxic and has perfect blood compatibility. Therefore, the TAMPS has a great potential for future clinical application as a rapid and multitarget hemostatic material.

Mesenchymal stem cells-derived exosomes modulate vascular endothelial injury via miR-144-5p/PTEN in intracranial aneurysm.

Phosphatase and tensin homolog (PTEN) is known to be involved in the pathogenesis of intracranial aneurysm (IA). This study investigated the molecular mechanism of exosomal miR-144-5p (ex-miR-144-5p) and PTEN in IA. Ex-miR-144-5p expression was assessed in serum from individuals with ruptured intracranial aneurysm (RA) or unruptured intracranial aneurysm (UA), and healthy controls (HC). Vascular endothelial cells (VECs) were co-cultured with exosomes isolated from mesenchymal stem cells (MSCs) with transfection of miR-144-5p mimic or miR-144-5p inhibitor. IA rats were induced by combing systemic hypertension and intrathecal elastase injection. VECs were transfected with miR-144-5p mimic or inhibitor to verify the impacts of miR-144-5p on cell viability and proliferation. The connection between miR-144-5p and PTEN was verified by luciferase activity assay. Our data proved that ex-miR-144-5p was decreased in both UA and RA patients. MiR-144-5p overexpression in MSCs-derived exosome promoted VEC viability, inhibited VEC proliferation of VEs, and decreased the protein levels of matrix metalloproteinase-9 (MMP-9), proliferating cell nuclear antigen (PCNA) and osteopontin (OPN). IA rats injected with ex-miR-144-5p mimic showed significant luminal dilation, declined smooth muscle layers, and thinned vascular wall. Besides, inhibited cell apoptosis and decreased protein expressions were also observed. However, ex-miR-144-5p inhibitor had the opposite effects both in vivo and in vitro. We validated that miR-144-5p directly targeted PTEN. MiR-144-5p mimic increased cell viability and proliferation and reduced protein expressions, which could be blunted by PTEN overexpression. This study suggests that miR-144-5p elevates PTEN expression, thereby boosting apoptosis and attenuating viability of VECs in IA.

The enhanced water splitting activity of a ZnO-based photoanode by modification with self-doped lanthanum ferrite.

The difficult separation and transfer of photoexcited charge carriers in composite photoelectrodes is a decisive factor limiting the efficiencies of semiconductor-based photoelectrochemical water splitting systems. Herein, to further enhance the photoelectrochemical properties of ZnO-based photoanodes, we constructed composite ZnO nanoarray photoanodes with Fe-self-doped lanthanum ferrite (denoted as La1-xFe1+xO3/ZnO NRs), which had the effect of killing two birds with one stone. This improvement strategy differs from the previously popular multi-step modification process, and integrates the dual benefits of a heterojunction and cocatalyst using the same material, the doped LaFeO3, which bypasses the shortcomings of multi-step charge transfer. Gratifyingly, benefitting from the suitable energy bands and excellent electrocatalytic oxygen evolution activity of La0.9Fe1.1O3, the photoanode exhibits outstanding bulk charge separation and surface charge utilization efficiencies, as well as achieving a photocurrent density that is over three times higher than that of pristine ZnO NRs, with a small onset potential (0.33 V vs. RHE). This electrode modification concept provides guidance for the development of other highly active photoelectrodes.

Efficient microwave absorber and supercapacitors derived from puffed-rice-based biomass carbon: Effects of activating temperature.

Biomass-based carbon is gaining increasing attention because it presents a promising prospect for economic growth and social sustainable development. Moreover, it is an excellent medium for application in electromagnetic and electronic devices. Here, puffed-rice-based carbon is obtained at various activating temperatures, and when the hollow bulges on the carbon disappear, the morphology of the carbon changes into sheet-like structures. The R-800 sample displays the highest ID/IG value and demonstrates the best performance when used as both a microwave absorber and an electrode material. The minimum reflection loss (RL) and bandwidth for RL < -10 dB of the R-800 sample reach -72.1 dB and 13.2 GHz, respectively, and the bandwidth for RL < -20 dB is as large as 7.0 GHz, illustrating the widest bandwidth among the five carbon specimens. The multiple reflection effects and scattering, good impedance matching, and interfacial polarization synergistically enhance the microwave absorption performances of the sample. At 1 A g-1, the specific capacitance of the R-800 sample reaches 117.2 F g-1 and the capacitance retention remains at 85.3%. Moreover, a hybrid supercapacitor R-800//R-800 demonstrates an outstanding energy density of 15.23 Wh kg-1, power density of 5739.43 W kg-1, and high cycle stability (94.5% after 5000 cycles). This functionalized biomass carbon provides a promising media for constructing a bridge between sustainable development and biomass materials.

Cu2O-Au nanowire field-effect phototransistor for hot carrier transfer enhanced photodetection.

In metal-semiconductor hybrid nanostructures, metal absorbs incident photons and generates hot carriers. The hot carriers are injected into the adjacent semiconductor and subsequently contribute to photocurrent. This process increases the conversion efficiency of optoelectronic devices and provides a new path of photodetectors. In this work, we report an enhanced photodetector by hot holes transfer, which is based on Au nanoparticles decorated p-type Cu2O nanowires. The photodetector achieves an enhanced photo-responsivity up to 0.314 A W-1, a higher detectivity of 3.7 × 1010 Jones. The response time and external quantum efficiency of the Cu2O-Au nanowires photodetector are 3.7 times faster and 18.2 times higher than that of the Cu2O nanowires, respectively. The findings indicate that Cu2O-Au nanowires would be a promising candidate in developing novel plasmonic hot carrier devices.

Superhydrophobic activated carbon-coated sponges for separation and absorption.

Highly porous activated carbon with a large surface area and pore volume was synthesized by KOH activation using commercially available activated carbon as a precursor. By modification with polydimethylsiloxane (PDMS), highly porous activated carbon showed superhydrophobicity with a water contact angle of 163.6°. The changes in wettability of PDMS- treated highly porous activated carbon were attributed to the deposition of a low-surface-energy silicon coating onto activated carbon (confirmed by X-ray photoelectron spectroscopy), which had microporous characteristics (confirmed by XRD, SEM, and TEM analyses). Using an easy dip-coating method, superhydrophobic activated carbon-coated sponges were also fabricated; those exhibited excellent absorption selectivity for the removal of a wide range of organics and oils from water, and also recyclability, thus showing great potential as efficient absorbents for the large-scale removal of organic contaminants or oil spills from water.

Preparation of infertile male rabbits by local electron beam irradiation for intratesticular transplantation of autologous bone marrow stem cells.

PURPOSE: To explore an efficient and safe protocol for the preparation of infertile male rabbits from which bone marrow stem cells (BMSCs) could be isolated and cultured. METHODS: Autologous BMSCs could be used for intratesticular transplantation and male infertility research. For this model, various doses (e.g., 6, 8, 10, or 12 Gy) of electron beam irradiation from a linear accelerator were locally applied to the scrotum of 5-month-old male New Zealand white rabbits. The effects of irradiation were compared between treatment groups, and with age-matched normal controls. Both morphology and hollow ratios of seminiferous tubules (HRST) were examined two, four, six, eight and 12-weeks post-irradiation. RESULTS: The seminiferous epithelium showed varying degrees of damage in all treatment groups compared with unirradiated controls, yet Sertoli and Leydig cells appeared unaffected. A dose-dependent response in spermatogenesis was also observed. BMSCs that were isolated and cultured from rabbits of the normal control group and the 12 Gy treatment group were compared with respect to morphology and growth. Starting at 6 weeks, HRST of the 12 Gy-treatment group were stable, and were the highest among all the groups. BMSCs from rabbits treated with 12 Gy also exhibited similar growth as the control group. CONCLUSION: Local dose of 12 Gy to the testes of 5-month-old male New Zealand rabbits is a protocol with which to obtain autologous bone marrow stem cells.

Preparation of infertile male rabbits by local electron beam irradiation for intratesticular transplantation of autologous bone marrow stem cells

PURPOSE: To explore an efficient and safe protocol for the preparation of infertile male rabbits from which bone marrow stem cells (BMSCs) could be isolated and cultured. METHODS: Autologous BMSCs could be used for intratesticular transplantation and male infertility research. For this model, various doses (e.g., 6, 8, 10, or 12 Gy) of electron beam irradiation from a linear accelerator were locally applied to the scrotum of 5-month-old male New Zealand white rabbits. The effects of irradiation were compared between treatment groups, and with age-matched normal controls. Both morphology and hollow ratios of seminiferous tubules (HRST) were examined two, four, six, eight and 12-weeks post-irradiation. RESULTS: The seminiferous epithelium showed varying degrees of damage in all treatment groups compared with unirradiated controls, yet Sertoli and Leydig cells appeared unaffected. A dose-dependent response in spermatogenesis was also observed. BMSCs that were isolated and cultured from rabbits of the normal control group and the 12 Gy treatment group were compared with respect to morphology and growth. Starting at 6 weeks, HRST of the 12 Gy-treatment group were stable, and were the highest among all the groups. BMSCs from rabbits treated with 12 Gy also exhibited similar growth as the control group. CONCLUSION: Local dose of 12 Gy to the testes of 5-month-old male New Zealand rabbits is a protocol with which to obtain autologous bone marrow stem cells.

ZnO-coated CuO nanowire arrays: fabrications, optoelectronic properties, and photovoltaic applications.

We report a growth of p-CuO nanowire arrays with a simple thermal oxidation and a fabrication of nanowire-based heterojunctions by coating the p-CuO nanowire arrays in an n-ZnO layer through a thermal decomposition method. Their optoelectronic properties and photovoltaic performance were investigated. Compared with the conductance in the dark, a 154% increase in photoconductance was obtained under a white light illumination of 100 mW/cm2. The heterojunctions exhibit an obvious photocurrent increment of 0.264 mA under the illumination of 141 mW/cm2. After annealing the heterojunctions at 100°C for 25 min, a larger open-circuit voltage of 0.37 V was obtained, the short-circuit current density increase to 0.63 mA/cm2 from original 0.49 mA/cm2. The overall power conversion efficiency is 0.1%.

Surface plasmon enhanced energy transfer in metal-semiconductor hybrid nanostructures.

We report a type of hybrid nanostructures composed of ZnO nanoparticles, CdSe/ZnS core/shell quantum dots (QDs), and Ag nanoprisms. With ultraviolet light illumination, the energy absorbed by ZnO nanoparticles was transferred to the CdSe/ZnS core/shell QDs inducing a photoluminescence (PL) emission. To enhance the PL emission, Ag nanoprisms were doped in the ZnO nanoparticles and the QDs. Enhanced energy transfer from the ZnO nanoparticles to the QDs via the surface plasmon effect of the Ag nanoprisms was also demonstrated. The PL emission dependence was investigated as a function of the doped Ag nanoprism concentration and a 7.4 times PL enhancement was obtained at an Ag nanoprism concentration of 5 × 10(-8) M.

CuO/ZnO core/shell heterostructure nanowire arrays: synthesis, optical property, and energy application.

Aligned CuO nanowires (NWs) were synthesized by a simple cost-effective oxidation method. They act as cores; high density CuO/ZnO core/shell heterostructure NWs were fabricated by thermal decomposition. Using the core/shell heterostructure NWs as a photoelectrode, a 0.71% photo-to-hydrogen conversion efficiency was obtained from photoelectrochemical water decomposition.